V15-B2 2006 SRT-10 Convertible Viper Black Clear Coat, Viper GTS Blue, Viper Race Yellow Clear Coat, Viper Red Clear Coat, Viper Slate Crystal Pearl Coat

From Viper_Registry
Jump to: navigation, search

V15-B2 2006 SRT-10 Convertible Viper Black Clear Coat, Viper GTS Blue, Viper Race Yellow Clear Coat, Viper Red Clear Coat, Viper Slate Crystal Pearl Coat

This Book is in process, there is no ETA at this time

Press Release History

Provided by Viper Club of America
When the third-generation Dodge Viper made its debut in 2003, it did so in the form of a convertible. For 2006, the
Dodge Viper SRT10 debuts in an all-new Coupe form - to the acclaim of "Viper Nation," the community of die-hard Viper
owners throughout the world. "Demand for a Dodge Viper Coupe started the day we introduced the Dodge Viper SRT10 Convertible
for 2003," said Dan Knott, Director, Street and Racing Technology (SRT), Chrysler Group. "The all-new 2006 Dodge Viper SRT10
Coupe is a natural evolution of the heritage of the Dodge Viper, and gives enthusiasts exactly what they're looking for in the
ultimate American sports car.

"Dodge Viper SRT10 customers want to go beyond the level of the regular enthusiast, to the level of outrageous performance," said Knott.
"Our all-new 2006 Dodge Viper SRT10 Coupe gives our customers that performance in a stunning new package." Dodge Viper SRT10 is about
uncompromising performance and stunning looks. With an 8.3-litre 500-horsepower V-10 engine contributing to blistering acceleration
(0-96 kilometres per hour (0-60 mph) in less than 4 seconds, 0-160-0 km/h (0-100-0 mph) in the low 12-second range), and a bold appearance
marked by Dodge's signature crosshair grille design, deep-cut side scallops, swept-back fenders and lowered hood lines, the Dodge Viper SRT10
Convertible had no equal. Until now. 2006 Dodge Viper SRT10 Coupe Exterior The exterior design of the all-new 2006 Dodge Viper SRT10 Coupe,
with its "double-bubble" roof and dramatic, unique rear styling with wrap-around taillamps reminiscent of the Viper GTS Coupe, is what sets
it apart from its Convertible sibling - and connects it to the Viper heritage. "It was important for us to sustain the emotion in the design,"
said Trevor Creed, Senior Vice President, Design, Chrysler Group. "We wanted the 2006 Dodge Viper SRT10 Coupe design to include a nod to the
original Viper GTS Coupe, but in a contemporary way.

"The Dodge Viper SRT10 Coupe owner is often a racer, and the car has to scream that, even when it's idling at the stoplight," Creed added.
"The bottom line is that the new Dodge Viper SRT10 Coupe's design says a lot about its unique character, and the car's performance is the payoff."
In many cases, a convertible is derived from a coupe. After the coupe's top is removed, structural reinforcements must be added to regain
torsional stiffness lost with the deletion of the roof structure. In the case of the 2006 Dodge Viper SRT10 Coupe, the starting point was
the Dodge Viper SRT10 Convertible - which has a stout structure to begin with. With the addition of the roof structure, the Viper SRT10 Coupe
becomes even more torsionally rigid than the Convertible. From an aerodynamic standpoint, the all-new 2006 Dodge Viper SRT10 Coupe is designed
for increased downforce and high-speed stability, with a sloping roofline and decklid spoiler.
The only bodywork that the Dodge Viper SRT10 Coupe shares with the Convertible is the front fascia and fenders, hood and doors. In addition
to the new canopy and decklid, the 2006 Dodge Viper SRT10 Coupe has a special windshield surround, door side glass, rear fascia, quarter panels
and taillights. The decklid for the Dodge Viper SRT10 Coupe was designed for customer convenience as well as structural integrity. The decklid
opening is deeply integrated into the rear fascia, which offers a low lift-over height for stowing cargo. Gas struts hold the decklid in place
when open; when closed, , the decklid is secured with a latch that meets federal safety regulations.

The 2006 Dodge Viper SRT10 Coupe design also took some of its cues from Dodge Viper's heritage. For example, the Center High-Mounted Stop Light
(CHMSL) on the decklid, although all-new for 2006, looks similar to the "snake-head" design on the Viper GTS of 1996-2002. The 2006 Dodge Viper
SRT10 Coupe will be available initially in Viper Blue with twin Stone White racing stripes, harkening back to one of the most popular Vipers ever,
the 1996 Dodge Viper GTS.

2006 Dodge Viper SRT10 Coupe Interior,
The form-follows-function strategy continues inside the 2006 Dodge Viper SRT10 Coupe. "For helmet clearance,
we brought back the 'double-bubble' roofline from the original Dodge Viper GTS," said Creed. "In fact, we began the process by utilizing a mannequin
with a helmet to determine the height and shape of the roof." Another functional interior feature for the many owners who will take their 2006 Dodge
Viper SRT10 Coupe racing is the roof and headliner structure that offers room to accommodate a safety cage, while maintaining as much headroom as possible.
Dodge Viper SRT10 Coupe-unique interior pieces also include various weatherstrip pieces, headliner, carpet and trim panels. A result of the 2006
Dodge Viper SRT10 Coupe's configuration is more usable trunk space - 0.11 m(3) (4 cubic feet) more than the Viper SRT10 Convertible, for a total of
0.18 m(3) (6.25 cubic feet).

The 2006 Dodge Viper SRT10 Coupe also features a unique two-tone interior colour scheme. 2006 Dodge Viper SRT10 Coupe Powertrain The magic numbers for
the Dodge Viper SRT10 are 500/500/500 - representing 500 horsepower, 525 pound-feet of torque and 8.3 litres (505 cubic inches) of displacement. An
aluminum-block 8.3-litre (505 cu. in.) V-10 engine powers the 2006 Viper SRT10 Coupe, generating 500 horsepower (372 kW) and 525 lb.-ft. (712 N-m) of
torque. Ninety percent of the torque is available to the driver across a wide band - the 1,500-5,600 rpm range. Transferring the Dodge Viper SRT10's
power to the rear wheels is a heavy-duty six-speed manual transmission.

2006 Dodge Viper SRT10 Coupe Braking
Dodge Viper SRT10 Coupe braking power is defined by Brembo 44/40 dual opposing piston calipers in the front and Brembo 42/38 dual opposing calipers
in the rear, gripping four 355 mm (14-inch) rotors. An anti-lock braking system (ABS) prevents lockup during hard braking. This system results in a
world-class braking performance of 60-0 mph in less than 30.5 metres (100 feet), and completion of SRT's signature 0-160-km/h (0-100-0 mph) test in
the low 12-second range.

2006 Dodge Viper SRT10 Coupe Ride and Handling
Handling and ride characteristics for the 2006 Dodge Viper SRT10 Coupe is derived from a race-bred, four-wheel independent suspension featuring lightweight,
high-performance aluminum control arms and knuckles, damped by lightweight coil-over shock absorbers. Power is delivered to the pavement via a Dana 44-4
Hydra-Lok speed-sensing limited-slip differential. The 2006 Dodge Viper SRT10 Coupe rides on unique forged aluminum wheels - 18" x 10" front and 19" x 13"
in the rear. Each is clad with a Michelin zero pressure run-flat tire, and each tire includes a low-pressure sensor in the valve stem.

The Dodge Viper SRT10 is hand-built at the Conner Avenue Assembly Plant in Detroit.

SPECIFICATIONS
All dimensions are in millimetres (inches) unless otherwise noted.

GENERAL INFORMATION
Body Style ------------------------------------------------------- Coupe
Assembly Plant ------------------------ Conner Avenue (Detroit, Michigan)
EPA Vehicle Class ------------------------------------------- Two-seater

ENGINE
Type and Description ------ 10-cylinder, 90-degree V-type, liquid-cooled
Displacement ------------------------------------ 8.3-litre (505 cu. in.)
Bore x ****** ------------------------------- 102.4 x 100.6 (4.03 x 3.96)
Valve System ------------- OHV, 20 valves, roller-type hydraulic lifters
Fuel Injection ---------------------- Sequential, multi-port, electronic
Construction ------ Aluminum alloy block with cast-iron liners, aluminum
alloy heads
Compression Ratio ------------------------------------------------ 9.6:1
Power (SAE net) ------------- 372 kW (500 bhp) (at) 5600 rpm (60.4 bhp/L)
Torque (SAE net) ------------------- 712 N-m (525 lb.-ft.) (at) 4200 rpm
Max. Engine Speed --------------------------------------------- 6000 rpm
Fuel Requirement -------------------- Unleaded premium-91 octane (R+M)/2
Oil Capacity -------------------------------------------- 9.9L (10.5 qt.)
Coolant Capacity --------------------------------------- 11.9L (12.8 qt.)
Emission Controls --------- Four, three-way catalytic converters, heated
oxygen sensors, engine internal features
Max. Gross Trailer Weight ----------------- not rated for trailer towing

ELECTRICAL SYSTEM
Alternator ------------------------------------------ 136-amp high-speed
Battery ---------------------- Leak-resistant, maintenance-free, 600 CCA
Radio -------------------- AM/FM/CD radio with internal six-disc changer,
with 310-watt RMS Audio Amplifier and seven speakers

TRANSMISSION
Manual six-speed overdrive with Hurst shifter mechanism and linkage
Description ------- Synchronized in all gears, electronic 1-4 skip-shift
and reverse lockout mechanisms
Gear Ratios
1st ----------------------------------------------------------- 2.66
2nd ----------------------------------------------------------- 1.78
3rd ----------------------------------------------------------- 1.30
4th ----------------------------------------------------------- 1.00
5th ----------------------------------------------------------- 0.74
6th ----------------------------------------------------------- 0.50
Axle ratio -------------------------------------------------------- 3.07
Overall Top Gear -------------------------------------------------- 1.5

FINAL DRIVE
Description -------- Frame-mounted hypoid bevel gear with Dana Hydra-Lok
speed-sensing limited-slip differential

DIMENSIONS AND CAPACITIES(a)
Wheelbase --------------------------------------------------- 2510 (98.8)
Track, Front ------------------------------------------------ 1565 (61.6)
Track, Rear ------------------------------------------------- 1547 (60.9)
Overall Length --------------------------------------------- 4459 (175.6)
Overall Width (at sills) ------------------------------------ 1911 (75.2)
Overall Height ---------------------------------------------- 1234 (48.6)
Ground Clearance -------------------------------------------- 130 (5.125)
Curb Weight (estimated) ---------------------------- 1546 kg (3,410 lbs.)
Weight Distribution F/R -------------------------------------- 49.4/50.6%
Frontal Area ---------------------------------- 1.79 sq. m (19.3 sq. ft.)
Drag Coefficient --------------------------------------- 0.39 (estimated)
Fuel Tank Capacity -------------------------------------- 70L (18.5 gal.)

ACCOMMODATIONS
Seating Capacity ----------------------------------------------------- 2
Head Room ---------------------------------------------------- 926 (36.5)
Leg Room ---------------------------------------------------- 1077 (42.4)
Shoulder Room ----------------------------------------------- 1375 (54.1)
Seat Travel --------------------------------------------------- 192 (7.6)
Recliner Range ---------------------------------------------- 45 degrees

BODY
Layout --------------------- Longitudinal front engine, rear-wheel drive
Construction ----------- Backbone tubular space frame with separate cowl
structure. SMC and RIM body panels, aluminum sills, RIM
front and rear fascias with composite impact beams

SUSPENSION
Front ------ Cast-aluminum unequal-length upper and lower "A" arms, coil
springs, low-pressure gas-charged shock absorbers, stabilizer bar
Rear ------------- Cast-aluminum unequal-length upper and lower "A" arms,
toe-control links, coil springs, low-pressure gas-charged shock
absorbers, stabilizer bar

STEERING
Type ------------------------------------ Power-assisted rack and pinion
Overall Ratio --------------------------------------------------- 16.7:1
Turning Diameter (curb-to-curb) ---------------------- 12.34 m (40.5 ft.)
Steering Turns (lock-to-lock) -------------------------------------- 2.4

TIRES(b)
Size and Type -------------------- P275/35 ZR18-front, P345/30 ZR19-rear
Manufacturer and Model ----------- Michelin ZP with low-pressure sensors
in valve stems
Revs per Mile ------------------------ Front-805.42 rpm; Rear-756.97 rpm

(a) All dimensions measured with two passengers.
(b) See also Tires under Feature Availability.

WHEELS(c)
Type and Material -------------------------------------- Forged aluminum
Size ------------------------------------- 18 x 10.0-front, 19 x 13-rear

BRAKES
Front
Size and type ----------- 355.0 x 32 (14.0 x 1.26) vented disc, with
four-piston fixed caliper ABS
Rear
Size and type ----------- 355.0 x 32 (14.0 x 1.26) vented disc, with
four-piston fixed caliper and ABS with
single-piston sliding caliper parking brake
Power Assist Type -------- Tandem diaphragm vacuum with zero lost travel


Disclaimer:

The Viper Truck Registry / Viper Registry is in no way affiliated with Chrysler, Dodge, Viper, Ram SRT-10, the Viper logo and likeness are registered trademarks of Chrysler.
The contents of this site are owned by the Viper Truck Registry / Viper Registry and may not be used or reproduced without the express written permission of the Viper
Truck Registry / Viper Registry. Copyright © 2005-2022 All rights reserved.
The Production Year is the Volume and the Books contained within those volumes are small collections within the Production Year (i.e., Color, Special Edition,
RT/10, GTS, SRT, ACR, GTC, etc.).

Also, apart from Special Editions, Vipers were NOT numbered, the Registry did the best it could with the data available at the time of this printing to provide
some sense of the build sequence.

These books are designed to help identify Vipers and the equipment that came on each Viper. Because the manufacturer was not involved in these books, I cannot
absolutely guarantee these books are complete and accurate, however, I have endeavored to create the most comprehensive accounting of Vipers available. The use
of this data is at your own risk.

User Contributions to the Wiki

  • This Wiki did allow for everyone to add what they know, however, do to the misdeeds of inconsiderate people, Contributions are now limited. I had to lock it down completely.
  • If you would like to be a contributor of Viper and/or Viper Truck data, please contact us after you create your User
  • If you know your 17-digit VIN, you can enter it and see what we have. If the VIN is not found, email ViperJeff@ViperTruckRegistry.com and it will be added.
  • This is also where all the different searches that have and will be requested will be presented